Enerzone Solution 2.3 Specifiche Scaricare il pdf (Pagina 40)

4.7 SECONDARY AIR TUBE REPLACEMENT

(see Figure 4.11)

1. Remove cotter pin at RH end of tube.

2. Slide tube to left and lower tube end below RH plenum.

3. Slide tube to right to remove.

4. Reassemble in reverse order using a new cotter pin. The cotter pin is a hammerlock style

and locks into place by hitting the head sharply with a hammer.

5. Note that any tube can be replaced without disturbing the baffle.

Important Notes:

Figure 4.11 – Secondary air tube replacement

The air tubes are identified for placement as follows:

Model Type of tube

Solution 1.6

Front ► 69 holes of 0.119"

Center& rear ► 69 holes of 0.109"

Solution 1.8

Front ► 41 holes of 5/32"

Center& rear ► 81 holes of 0.109"

Solution 2.3

Front ► 41 holes of 5/32"

Center& rear ► 81 holes 0.109"

Solution 2.9

All tubes ► 65 holes of 7/64"

1 2 ... 35 36 37 38 39 40 41 42 43 44 45

Nessun commento

Enerzone Solution 2.3 Specifiche Pagina 40