Enerzone Solution 2.0 Specifiche Pagina 22

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 40
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 21
21
2.3 CHIMNEY CONNECTOR
Your chimney connector (commonly called stove pipe) and chimney must have the same
diameter as the stove’s exhaust outlet. The stove pipe must be made of aluminized or cold roll
steel with a minimum 24-gauge thickness (0.021" or 0.53 mm). It is strictly forbidden to use
galvanized steel.
The following recommendations may be useful for the installation of your chimney connector:
Your chimney connector should be assembled in such a way that the male end (crimped)
faces down to prevent creosote dripping outside the joints. Attach each of the sections to one
another with three equidistant metal screws. Also use three equidistant metal screws to
attach the connector to the stove’s exhaust collar. See Figure 2.3 (A) and Figure 2.3 (B).
The pipe must be short and straight. All sections installed horizontally must slope at least ¼
inch per foot, with the upper end of the section toward the chimney. See Figure 2.3 (B).
To insure a good draft, the total horizontal length of the connector should never exceed 8' to
10' (2.4 to 3.04 m). In the case of vertical installation, the total length of the connector can
be much longer and connected without problem to the chimney at the ceiling level.
There should never be more than two 90 degrees elbows in the whole connector and chimney
system. Never start with a 90
o
elbow. Always go up vertically for at least 2 feet from the flue
spigot before using a 90
o
elbow.
The connector must not pass through any combustible material, nor may it pass through a
concealed space (such as an attic, roof space, or closet). If passing through a wall, ceiling, or
into a masonry chimney, use either chimney components listed for that specific use, or means
acceptable to local authorities having jurisdiction over the installation.
Furthermore, installation of a draft damper is prohibited. Indeed, with a controlled
combustion wood stove, the draft is regulated upon intake of the combustion air in the stove
and not at the exhaust.
Vedere la pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Commenti su questo manuale

Nessun commento

MSI AG220 2PE-027XEU-B5421H8G1T0SXANX manuals

Owner’s manuals and user’s guides for All-in-One workstations MSI AG220 2PE-027XEU-B5421H8G1T0SXANX.
We providing 1 pdf manuals MSI AG220 2PE-027XEU-B5421H8G1T0SXANX for download free by document types: User Manual






More products and manuals for All-in-One workstations MSI

Models Document Type
AE2712G Specifications   MSI Wind Top AE2712G, 91 pages
AG270 2QC-058RU User Manual   MSI Wind Top AG270 2QC 3K-002EU, 59 pages
AE2212-015EU Specifications   MSI Wind Top AE2212-015EU, 90 pages
AE203G-014RU User Manual   MSI Wind Top AE203G-014RU, 53 pages
AP1612 Specifications   MSI Wind Top AP1612, 51 pages
AE222 User Manual   MSI Wind Top AE222-067XEU-WG3224G1T0SXGMX, 57 pages
AE200 5M-B462104G50S7VGMXH User Manual   MSI Wind Top AE200-055XEU, 53 pages
AE202-034EU User Manual   MSI Wind Top AE202-034EU, 41 pages
AE201 User Manual   MSI Wind Top AE201, 49 pages
AE220 5M-052XEU-W462104G50SXANX Specifications   MSI Wind Top AE220-037EU, 91 pages
AE2081G Specifications   MSI Wind Top AE2081G, 87 pages
AE2420 Specifications   MSI AE2420, 71 pages
Wind Top AE2240 Specifications   MSI Wind Top AE2240, 67 pages
AE2280 Specifications   MSI AE2280, 64 pages
Wind Top AE2031 Specifications   MSI Wind Top AE2031, 87 pages
Wind Top AE2051 Specifications   MSI Wind Top AE2051, 87 pages
AE2040 Specifications   MSI AE2040, 68 pages
AP2000-P6245 Specifications   MSI AP2000-P6245, 64 pages
Wind Top AE2071-EU-WG6304G50S7PM Specifications   MSI Wind Top AE2071, 54 pages
AE2010-234US User Manual    MSI AE2010-3225W7P, 40 pages